BH GSO IEC 61290-1-2:2016
Bahraini Standard
Current Edition
·
Approved on
08 February 2016
·
Optical amplifiers - Test methods - Part 1-2: Power and gain parameters - Electrical spectrum analyzer method
BH GSO IEC 61290-1-2:2016 Files
English
null Pages
Current Edition
Reference Language
BH GSO IEC 61290-1-2:2016 Scope
This part of IEC 61290 applies to all commercially available optical amplifiers (OAs) and optically amplified sub-systems. It applies to OAs using optically pumped fibres (OFAs based on either rare-earth doped fibres or on the Raman effect), semiconductors (SOAs), and waveguides (POWAs).
NOTE The applicability of the test methods described in the present standard to distributed Raman amplifiers is for further study.
The object of this standard is to establish uniform requirements for accurate and reliable measurements, by means of the electrical spectrum analyzer test method, of the following OA parameters, as defined in Clause 3 of IEC 61291-1:
a) nominal output signal power
b) gain;
c) reverse gain;
d) maximum gain;
e) polarization-dependent gain;
f) large-signal output stability;
g) saturation output power;
h) maximum input signal power;
i) maximum output signal power;
j) input power range;
k) output power range;
l) maximum total output power.
In addition this test method provides a means for measuring the following parameters:
− maximum gain wavelength;
− gain wavelength band.
NOTE All numerical values followed by (‡) are suggested values for which the measurement is assured. Other values may be acceptable, but should be verified.
The object of this standard is specifically directed to single-channel amplifiers. For multichannel amplifiers, one should refer to the IEC 61290-10 series2.
Best Sellers From Electrical Sector
GSO 2530:2016
Gulf Standard
Energy Labelling And Minimum Energy Performance Requirements For Air-Conditioners
GSO 34:2007
Gulf Technical Regulation
LEAD-ACID STARTER BATTERIES USED FOR
MOTOR VEHICLES AND INTERNAL
COMBUSTION ENGINES
BH GSO 34:2015
GSO 34:2007
Bahraini Technical Regulation
LEAD-ACID STARTER BATTERIES USED FOR
MOTOR VEHICLES AND INTERNAL
COMBUSTION ENGINES
GSO 35:2007
Gulf Standard
Methods of test
for lead-acid starter batteries used for motor vehicles
and internal combustion engines
Recently Published from Electrical Sector
GSO IEC 63296-1:2024
IEC 63296-1:2021
Gulf Standard
Portable multimedia equipment - Determination of battery duration - Part 1: Powered loudspeaker equipment
GSO IEC 61558-2-4:2024
IEC 61558-2-4:2021
Gulf Standard
Safety of transformers, reactors, power supply units and combinations thereof - Part 2-4: Particular requirements and tests for isolating transformers and power supply units incorporating isolating transformers for general applications
GSO IEC 60335-2-23:2024
IEC 60335-2-23:2016
Gulf Standard
Household and similar electrical appliances - Safety - Part 2-23: Particular requirements for appliances for skin or hair care
GSO IEC 61558-2-16:2024
IEC 61558-2-16:2021
Gulf Standard
Safety of transformers, reactors, power supply units and combinations thereof - Part 2-16: Particular requirements and tests for switch mode power supply units and transformers for switch mode power supply units for general applications